Tohnichi Digital Torque Screwdriver Tester TDT3-G Series (Penang, Malaysia Dealer)

	IMPROTECH TECHNOLOGY No.1-4, Pangsapuri Seri Mawar, Tingkat Mawar 3, 12300 Butterworth, Penang. Malaysia. Phone: 6012-4661514 Fax : 604-3311514
	Instructions Accessories Parts
	TDT3-G
	Digital Torque Screwdriver Tester
	Ideal for Testing Click and Dial Indicating Torque Screwdrivers & Small Torque Wrenches Newly added judgment function, USB output, and increased resolution Multiple units of measure selection by keypad Loading devices keep tooling stable during testing proceedure for more accurate readings Optional Accessories: TDTLA3 Loading Bar for Testing Small Capacity Torque Wrenches LTA Loading Fixture for Dial Indicating Torque Screwdriver
	TDTCL Calibration Kit for TDT3-G FTD2-S Dial Torque Screwdriver RTD Adjustable Click Torque Screwdriver STC Digital Torque Screwdriver SF Flat Beam Torque Wrench TDT3-G with standard loading accessory STA for click drivers Easily change to Optional Dial Type Screwdriver Loader (LTA) or Small Wrench Loader (TDTLA3)
	Model TDT2-G:  Multiple Unit of Measure Models						Accuracy ±1%+1Digit
	Model Torque Range Square Drive Dimensions [mm] Weight Approx. Standard Accessories cN•m kgf•cm ozf•in lbf•in Min.- Max. 1 digit Min.- Max. 1 digit Min.- Max. 1 digit Min.- Max. 1 digit mm Overall Length Width Height kg TDT60CN3-G 2-60 0.005 0.2-6 0.0005 3-80 0.005 0.2-5 0.0005 6.35 Hex (Male) with a groove (0.7mm) 230 220 225 11 •AC Adapter (BA-6) •Loading Device for Click Type Screwdrivers (STA) TDT600CN3-G 20-600 0.05 2-60 0.005 30-800 0.05 2-50 0.005
	“-G” models feature 4 changeable units of measure through keypad set up Factory certificate of calibration is included and data is supplied in SI units only. NIST Traceable certificates are available upon request for an additional fee. For NIST certifications any one of the units of measure may be selected to be shown on the certificate.
	Common Specification
	DATA MEMORY 1000 data STATISTICAL PROCESSING Sample size, max./min./mean values MEASUREMENT MODE PEAK / RUN ZERO ADJUSTMENT  Auto UPPER/LOWER LIMIT VALUE SETTNG 10 DATA OUTPUT RS232C-compliant, USB (B type), serial communication RESET Manual /Auto [settable in the range from 0.1 to 5.0 sec.] Square Drive hex 6.35 (Male) minus 0.7mm (with groove) OPERATING TEMPERATURE RANGE 0 ~ 40°C (without condensation) POWER AC 100 ~ 240V 50/60Hz STA Loading Device for Click Drivers (LTD/RTD) Standard Applicable Grip Diameter 7 to 50mm LTA Loading Device for Indicating Drivers (FTD) Optional Applicable Models ( ) is applicable for a part of the capacity range STA Loader LTD/RTD 15, 30, 60CN (60), 120, 260, 500CN NTD/RNTD 15, 30, 60CN (60), 120, 260, 500CN AMLD (4), 8CN BMLD 15, 30CN LTA Loader (0ptional) FTD 50CN (50), 100, 200, 400CN FTD2-S (5), 10, 20, 50CN (50), 100, 200, 400CN STC 50CN (50), 200, 400CN
	Optional Accessories:
	LOADING EQUIPMENT FOR TDT
	Model Description TDTLA3 Loader for Small Torque Wrenches LTA Loader for Dial Indicating Torque Screwdrivers
	External Battery Pack
	Model Type Usage Time Weight Size Applicable Series Models BP-100-3 Rechargeable Lithium-ion 7 hrs 225g W109mmXD73.6mmXH23mm DOTE3(-G), LC2(-G), TDT2/3(-G), TME2
	For using tester where electrical outlet is not available
	Cables
	Part # Applicable Models 382 TDT3-G to EPP16M2 383 TDT3-G to PC (D-SUB 9 Pin Female) 385 TDT3-G to PC (USB B Type)
	Excel Receiver Software complimentary with purchase of Cable.
	Hex Adapters
	Part# Description 480 1/4-5.5-8-12 481 1/4-6-10-13 482 1/4-7-11-14 483 1/4-16-19-22 484 1/4-17-21-24
	TDT3 Loading Device Connecting Adpter for Previous Versions of TDT
	Part # Description 485 Adapter for STA, TDTLA3, LTA to be used with TDT and TDT2-G
	Dimensions
	Website: http://www.lelong.com.my/merchant/khengcs.htm Company Name: IMPROTECH TECHNOLOGY Address: N0.1-4, Pangsapuri Seri Mawar, Tingkat Mawar 3, 12300 Butterworth, Penang, Malaysia. Contact: +6012-4661514 CALL/SMS/ WATSAPP Email:impro.tech@yahoo.com chung_sim@hotmail.com